Instructions For Outdoor Carpet Installation
There are a great number of different possibilities when choosing outdoor carpets, both for the form and for the function. But installing outdoor ca...
There are a great number of different possibilities when choosing outdoor carpets, both for the form and for the function. But installing outdoor carpets yourself is still the same procedure, regardless of the shape and material of the carpeting that you selected. This guide will steer you through the installation process.
There are several tools that you need to get for the installation, such as a utility knife, scissors and a straight edge. You also need the right types of adhesive and solvents to clean up. The shop where you bought the outdoor carpet, whether online or brick and mortar, can supply you with all these materials.
Don’t forget that you need the right type of outdoor carpet for the job. Don’t save on waterproofing if the area you are installing the carpeting in is not covered, and get UV-resistant materials if sunlight and color fading could be an issue. The glue should be specific and high-quality or all your effort will be naught in a short time.
To start, wash, dry and clean the floor area thoroughly and unroll the outdoor carpet somewhere near, so that it can air out. Then glue strips of double sided tape, with strips at a half meter distance, on the floor in a grid pattern. Don’t uncover the upper adhesive sides yet.
Once that is done, place down the outdoor carpet in the first area and measure it well against the edges of the area that is to be carpeted. Leave a couple of extra centimeters against walls, and cut away the remaining protruding carpet. Cut the carpet perpendicularly to its main surface, not at an angle.
Next, ply half the outdoor carpet on top of the other half, and start uncovering the adhesive tape from the free half of the area. Apply extra glue to the floor, if needed. Make sure to precisely follow the instructions specific to the glue that you are using.
Now you can finally start to place down a piece of the carpet. Lay down the first half steadily, without haste, to avoid unseemly creases. Don’t rush and make sure that the carpet adheres to the tape and glue evenly and perpendicularly to the floor area.
Next, repeat with the other half of the carpet. Prepare the adhesive tape, add glue. Once the whole piece of outdoor carpet is in place, walk on it and smoothen out any last creases.
Now finish the trimming of the outdoor carpet edges, always cutting straight lines and at right angles to the main carpet surface. Once the sizing is correct, remove any excess glue with solvent and clean the edges.
Repeat the process on the next area to be carpeted, until all the outdoor carpet has been installed. Where two pieces of carpet meet, the area can either be sown together or covered with a special metal casing. You will soon have a perfectly installed outdoor carpet!
OutdoorCarpetGuide.com is the premier resource for on the Net, with information on subjects such as how to , as well as on where to buy them, how to choose them, how to install them – click the links above to find out more!